Victron Phoenix Battery Charger 12/50 (2+1)

Product Code: Victron Phoenix Battery Charger 12/50 (2+1)

Brand: Victron Energy

Product Features

  • Nominal Voltage: 12 Volt
  • Charging Voltage: 14.4 V
  • Charger Type: 4 stage adaptive
  • Battery Capacity Range: 200 - 800 Ah
  • Protection category: IP21
Show More
Please enquire
Product Description

Victron Phoenix Battery Charger 12/50 (2+1) 120-240V

Adaptive 4-stage charge characteristic: bulk - absorption - float - storage
The Phoenix Charger features a microprocessor controlled ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the process relative to the way the battery is being used.
 
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.

Preventing damage due to excessive gassing
If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Phoenix Charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached

Less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

To increase battery life: temperature compensation
Every Phoenix Charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries and/or when important fluctuations of battery temperature are expected.
 
Battery voltage sense
In order to compensate for voltage loss due to cable resistance, Phoenix Chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
 
Universal 90-265 V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation)
The chargers will accept a 90-400 V DC supply.
 
Computer interface
Every Phoenix Charger is ready to communicate with a computer through its RS-485 data port. Together with Victron VEConfigure software (can be downloaded from website), and the data link MK3-USB (see accessories) all parameters of the chargers can be customised.


    Product Specification
    Nominal Voltage 12 Volt
    Charging Voltage 14.4 V
    Charger Type 4 stage adaptive
    Battery Capacity Range 200 - 800 Ah
    Protection category IP21
    Charge Current House Battery 50A
    Charge current starter Battery 4A
    Dimensions (mm) H x W x D 350 x 200 x 108
    Operating temperature -40ºC to +60ºC
    Weight 3.8 kg
    Show More
    Downloadable Media